FREE SHIPPING TO THE LOWER 48 STATES OF THE USA ON ORDERS OVER $100

Sol-Go 115W, 230W, 460W RV/Marine Off Grid Flexible Solar Power Kit

5 items left
Size

Comprehensive, all-inclusive off grid 115W, 230W, or 460W solar power kit for RV and Marine installations using Sol-Go 115W flexible solar panels. Sol-Go modules use only high power back contact solar cells from SunPower as well as top-quality module materials, delivering the highest power density in the market, up to 35% more power density.

Kits include MidNite Solar charge controller, breaker, breaker box, and battery temperature sensor.  Cables, double entry gland, and unlocking tool.  This kit also includes a complete solar electrical design diagram to guide your installation with ease.

Everything you need in a single package, ready to go for your boat or RV solar panels installation! 

PLEASE NOTE: Before purchase, please determine whether or not your RV is already equipped with an inverter if you plan to run any 120V appliances off your solar kit. Inverters convert 12V current to 120V, and are sold separately.  Need help? Contact Us with any questions, and we will get you safely set up to meet your needs.

Sol-Go 115W Flexible Panel

The solar cells used by Sol-Go have a thick, copper foundation, allowing for the flex modules to resist power loss via cracking and corrosion. Modules with front contact cells are more likely to lose power when they are bent or impacted and when in corrosive environments. Sol-Gos module materials are chosen with extensive testing to ensure a long module lifetime.

The Sol-Go flex module can be rapidly installed with adhesives and/or use of the stainless steel grommets. Please review the Sol-Go install guide at www.sol-go.com for guidance on safety, installation, and care of the panels.

Sol-Go Features & Attributes
  • Lightweight and flexible
  • MC4-compatible connector cables
  • 5-Year limited power warranty of 80% of the minimum specified power rating
  • 2 Year product warranty
  • Weight: 8 lbs
  • Dimensions:  46.0 × 23.0 × 1.0 in
  • MPN: SG-FLEX-115-S
  • Panel Type: Flexible
  • Panel Cells: 36

MidNite Solar MNKIDBASIC KIT Charge Controller

Midnite Solar’s charge controller kits include everything you need to install a basic solar powered system, including the controller, breakers, wiring and an appropriate combiner or breaker box. This kit includes Midnite’s Kid charge controller with the necessary circuit breakers, wire and fittings.

Features & Attributes

  • Midnite KID MPPT charge controller
  • Midnite Big BABY box
  • 2 Midnite MNEPV30 breakers, One for PV input and one for battery output
  • 1 63 amp DC ground fault breakers for PV side of the KID
  • 1 Battery temperature sensor
  • Conduit and adapters
  • Wire and strain reliefs ETC

About the MidNite Solar MNEPV-30 Breaker

This breaker for E-Panel, MNDC, Combiners and Baby Boxes is an important part of any power system. The MNEPV-30 is a 150VDC din rail mount breaker with 30amps, making it superior to other CBI QY breakers. 

MNEPV-30 Features & Attributes

  • Dimensions (LxWxH): 2.9 × 4.7 × .5 inches
  • Weight: .25 lbs

About the MidNite Solar MNBB Big Baby Box

The Big Baby Box allows for an ETL listed 4-position din rail box. It also includes a ground box lug and mounting provisions for a short insulated bus bar as well as a ground bus bar.

Big Baby Box Features & Attributes

  • Dimensions (LxWxH): 8 × 5 × 3 inches
  • Weight: 3 lbs
  • Enclosure for retrofits, small inverter disconnect and PV disconnect
  • Holds up to 4 13mm wide din rail breakers from 1-63 amps

About the MidNite Solar Midnite MNBTS Battery Temperature Sensor

This battery temperature sensor will help to maximize performance for your inverter or charge controller. This sensor is attached to a 15' cable.

Link Solar ABS Double Entry Gland for All Cables for RV & Boat

Link Solar’s ABS double cable entry gland can be used to pass PV wire and other cable through a surface, into a motorhome or boat. These are ideal for securely routing PV wire through the rooftop of an RV.

The PG13.5 cable glands work with our MC4 PV wire or any other cable with a diameter in the range of 6-11mm. These are easy to install while still offering protection from leaks and are a great addition to any RV or marine system.

ABS Double Entry Gland Features & Attributes

  • Dimensions (LxWxH): 4.4 × 2.1 × 2.1 inches
  • Weight: .19 lbs
  • PG13.5 junction box
  • Includes ABS box and two cable glands for PV wire positive and negative
  • Sealant not included, see manufacturer's recommended sealant depending on the surface 

Electrical Design Diagram

Clearly understand how to install your SunPower 110/220/440W RV and Marine Off Grid Flexible Panel Solar Power Kit according to all manufacturers' specifications to ensure safety and maximum functionality. 

Four Star Solar MC4 10 AWG - Cable Extensions

MC4 Extension Cables have newer, snap-together multi-contact hard plastic connectors on each end. You can use these output cables between PV arrays with multi-contact cable outputs and junction boxes or grid-tie inverters.

Our MC4 cables have a male connector on one end and a female connector on the other end. You can use them to extend module output cables or you can cut anywhere along the wire to obtain the needed length of male and female cable to run from the ends of a module string to a combiner box or to an inverter. For example, if you need a 30’ male and a 20’ female, order a 50’ cable.

Made with black #10 AWG USE-2 sunlight resistant cable. 

Multi-Contact USA MC4 Unlocking Tool

Multi-Contact PV-MS (32.6024) unlocking tool for MC4 cable connectors.

PV Splice Connector - 3 Port - 18-10AWG (440W Kit Only)

Basic three-port splice connector able to accomodate wire sizes ranging from 10 to 18 AWG. Rated for 30a 300v for outdoor applications. These splices are especially useful for wiring two PV panels together in parallel (requires two Splice Connectors.)

Features & Attributes

  • UL 486C listed
  • 30 amps 300 volt max
  • 18-10 AWG wire
  • Three ports
  • Outdoor rated

The 110W Sol-Go Kit is ideal for smaller power needs and works well for charging 12V batteries or running small electrical appliances if used in conjunction with an inverter.  This kit includes slightly varied components, to include: 

x1 - Sol-GO 115W Flexible Solar Panel
x1 - Link Solar ABS Double Entry Gland for All Cables for RV & Boat Racking 
x1 - MidNite Solar MNKIDBASIC KIT Charge Controller

  • Midnite KID MPPT charge controller
  • Midnite Big BABY box
  • 2 Midnite MNEPV30 breakers, One for PV input and one for battery output
  • 1 63 amp DC ground fault breakers for PV side of the KID
  • 1 Battery temperature sensor
  • Conduit and adapters
  • Wire and strain reliefs ETC
  • MPN: MNKIDBASIC KIT

x1 - Four Star Solar MC4 10 AWG - 30' Cable Extension
x1 - Electrical Design Diagram
x1 - Multi-Contact USA MC4 Unlocking Tool

The 230W Sol-Go RV and Marine Off Grid Flexible Panel Solar Power Kit includes everything in the 1150W kit, plus an extra 115W Sol-Go flexible solar panel The 30' cable is replaced with a 50'.  

    The 460W Sol-GO Kit includes all of the components for the 220W solar power kit, plus

    • 2 additional Sol-Go 115 watt solar panels (total 460W),
    • 2 of the Four Star Solar MC4 10 AWG - 50' Cable Extensions, and
    • 2 Busbar PV Splice Connector - 3 Port - 18-10AWG

    Ships to all 50 States and US Territories only. 

    NO RETURN POLICY Sol-Go solar panels and associated solar power kits are subject to a strict no-return policy.  Please be certain of your install requirements, and other solar installation product compatibility issues prior to purchase. Claims for damage during shipment must be documented via photography and made directly with the shipping carrier within 24 hours of delivery. Solar Sporting Goods will insure your deliveries and assist with damage claims to the extent possible.

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)