Tycon Power 48VDC 210W Wet/Gel Smart Battery Charger, 120/240VAC in, overdischarge protection. Regulated 48VDC 120W Load Output.
The TP-BC48-300 smart battery chargers provide up to 210W of total power. Part of the power is allocated to the regulated load output and remaining power is allocated to battery charging. The smart battery charger is compatible with GEL/AGM type sealed lead acid batteries and also WET type lead acid batteries (like car batteries).
Add this smart battery charger to your grid tie solar panel and solar charge controller system if supplemental power from solar is desired. The TP-BC48-300 provides seamless switchover from AC power to battery power so there is no interruption which could reset a user’s electronics. The charger auto-recovers from a power failure so no user action is necessary.
The load output is regulated so that output voltage does not exceed 48.5VDC. Also the load output will turn off when the battery voltage is low to prevent over discharge of the batteries which can shorten the useable life of the batteries. Load output will turn back on automatically when the AC power source comes back on.
The charger has various protections for short circuit, overvoltage protection, overcurrent and reverse battery. It operates over a wide temperature range making it suitable for industrial applications. The battery charger will not work without a battery connected.
There are various LEDS on the front panel to see status-at-a-glance of the Load Output, Charging Condition and AC Power Condition.
Size: 250 x 185 x 55mm (9.8 x 7.3 x 2.2in)
Weight: 2.4kg (5.2lb)
TP-BC Series Battery Charge Controllers Spec Sheet
TP-BC12-300 Uninterrupted Power Supply User Guide