The UPSPro™ 60W 200VA Polycarbonate Enclosure, 24V 9Ah AGM Battery, 24VDC PoE, Solar Ready. 24hr backup @ 7W
The UPSPro™ series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers.
- 60W 200VA 24VDC 9Ah AGM Batt 48V PoE @ 7W
- 60W 430VA 24VDC 18Ah AGM Batt 24V PoE @ 14W
- 60W 430VA 24VDC 18Ah Batt 48V PoE @ 14W
Backup System - Solar Ready
- Protects sensitive electronics from damaging power line surges
- Provides 24 hour battery backup @ 7W load or 12 hours @ 14W load
- Powered Over CAT5 Ethernet cable
- 24VDC PoE regulated voltage, 24VDC Secondary wire terminal output
- Max 60W Output
The enclosure is powered over a CAT5 network cable using Power Over Ethernet (PoE) with a high power PoE Supply/Inserter (included). Inside, the system has a RJ45 connector as DATA/PoE input and an RJ45 connector as a DATA/PoE output which gets connected to the customers POE device. There is also a regulated 24VDC output on a wire terminal connection. Each output is capable of 30W max for a total of 60W. The integrated controllers are Solar Ready and can be used with an external 24VDC solar panel up to 280W in addition to grid power supplied via PoE.
Customer electronics operate from battery power so they are isolated from damaging power line surges. The batteries are continuously charged via the PoE input and/or solar power. The solar power takes precedence over grid power when available.
Features include a battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.
There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc.
UPSPro™ Spec Sheet
UPSPro™ Quick Install Guide